Gebuwin winchesDescription
Gebuwin Spur gear hand winch (EV) 600 kg
The spur gear winches TL300 and TL600 are used to hoist a load of resp. 300 and 600 kg and can easily be mounted to a wall.
The hoisting capacity is calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, these spur gear winches have a high performance efficiency and the robust design gives the winches a long lasting service.
Product specifications
- Robust construction
- Standard version with single cable drum
- Primarily used for hoisting loads, also used for pulling
- Adjustable crank and recoil free
- High performance efficiency due to minimal friction loss in transmission
- Equipped with a load pressure brake
- All rotating parts run in maintenance free bearings
- Static safety minimum factor 4
- Standard wall mounted
- The numbers in the product name correspond with the hoisting capacities on the first cable layer
- EV = Zinc plated finish with a minimum of 6 micron
- Cable outlet possible upward, downward and side ways
Technical specifications
| Capacity 1st layer | 600 kg (1323 lb) |
|---|---|
| Capacity 4th layer | 408 kg (899 lb) |
| Capacity top layer | 336 kg (741 lb) |
| Lifting speed | 1,7 m/min (6 ft/min) |
| Rope diameter-Ø | 6 mm (0.24 in) |
| MBL of cable | 17 kN |
| Rope storage 1st layer | 1 meter (3 ft) |
| Rope storage 4th layer | 7 meter (23 ft) |
| Rope storage top layer | 12,3 meter (40 ft) |
| Crank effort at full load | 10 kg (22 lb) |
| Weight (without rope) | 11 kg (24 lb) |
| Article number | 77131000 |
| Type name | TL600 |
Options
- EX = ATEX certified, for zones 2 and 22
