Gebuwin winchesDescription
Gebuwin Spur gear hand winch 1000 kg
The spur gear winches TL1000 and TL1500 are used to hoist a load of resp. 1000 and 1500 kg and can easily be mounted to a wall.
The hoisting capacity is calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, these spur gear winches have a high performance efficiency and the robust design and closed spur gear box gives the winches a long lasting service. The spur gearboxes are also offered as a separate product. For more information, go to the spur gearboxes product page here.
Product specifications
- Robust construction
- Standard version with single cable drum
- Primarily used for hoisting loads, also used for pulling
- Adjustable crank and recoil free
- High performance efficiency due to minimal friction loss in transmission
- Equipped with a load pressure brake
- All rotating parts run in maintenance free bearings
- Static safety minimum factor 4
- Standard wall mounted, see here for floor (console) mounted versions
- The numbers in the product name correspond with the hoisting capacities on the first cable layer
- Standard paint finish in grey (RAL 7035) and black (RAL 9005) according to DIN 12944, C1M
- Sealed spur gear casing according to protection classification IP44
Technical specifications
| Capacity 1st layer | 1000 kg (2205 lb) |
|---|---|
| Capacity 4th layer | 726 kg (1601 lb) |
| Capacity top layer | 614 kg (1354 lb) |
| Lifting speed | 1,2 m/min (4 ft/min) |
| Rope diameter-Ø | 8 mm (0.31 in) |
| MBL of cable | 34 kN |
| Rope storage 1st layer | 3,5 meter (11 ft) |
| Rope storage 4th layer | 19,5 meter (64 ft) |
| Rope storage top layer | 33 meter (108 ft) |
| Crank effort at full load | 11 kg (24 lb) |
| Weight (without rope) | 27 kg (60 lb) |
| Article number | 77281600 |
| Type name | TL1000 |
Options
- SS = Stainless steel SAE grade 304
- EX = ATEX certified, for zones 2 and 22
