Description
Electric worm gear winch EW900 – 990 kg – 400V / 230V
Industrial electrical pulling and lifting winch, robust but also safe. The winch is IP55 standardised and therefore resistant to splash water. And its thick housing with a high FEM value of at least 1 CM is a fine example of craftsmanship.
Product specifications
- Compact and robust construction
- All rotating parts run in maintenance free bearings
- Only used for pulling loads.
- Standard paint finish in grey (RAL 7035) and black (RAL 9005) according to DIN 12944, C1M
- Constructed with a worm gear transmission as centre point between the electromotor and cable drum
- Constructed with a covered and sealed gearing (IP54) and insulation classification B
- Winches from 1,000 kilo’s and up are standard equipped with an overload protection
- The connection duration is S3 – 40% – 120 c/h
- Available in 230 Volts and 400 Volts
- The pendant control switch has a standard length of 1 meter
- Maintenance free ball bearings
- More cable storage than standard 30 meters by steps of 10 meters
Options
- EV = Zinc plated finish with a minimum of 6 microns
- EX = ATEX certified, for zones 2 and 22
- GD = Grooved cable drum
- XD = Multiple (X) cable compartments possible, click here to contact for specific requests
- Limit switch for hoisting applications
- Low voltage control (48 Volts)
- Radio control
- Frequency control
- Free spool cable drum possibility from EW250 and higher
- Wall mounted control switch instead of pendant control switch
- Electrical overload protection for EW990 and under
- Possibility to switch between 2 speeds only for the EW125, EW250 and EW500 400 Volt versions
- Electrical winches with double the standard speed
